2. High Speed Cut- to- length Line This high speed cut-to-length line consists of hydraulic loading car, double-head uncoiler, pre-leveler, fine-leveler, length gauge, shear, stacker, etc. It is used to cut the cold rolled coils into sheets in certain length.
    2. Oval Tank Head Flanging Machine Our flanging machine is equipped with a copying system which is ideally suitable for flanging oval tank heads or any other special shaped tank heads. These tank heads are commonly used in liquid tank trucks.
    2. Transformer Radiator Fin Plate Forming and Welding Line Our transformer radiator fin plate forming and welding line take advantage of the technology from Germany GEORG and Canadian MTM. It is designed mainly to manufacture fin plate of different widths (520 or 535mm, 480mm, 320 or 310mm) with high efficiency.
    2. CTC Production Line Our CTC production line is able to produce the continuous transposed conductors used in huge transformer windings with voltage of less than 1000MVA and 1000KV. This device is capable of stranding many flat copper wires together. It, through accurate mechanical actions of transposing head ...
    2. CNC 3D Wire Bending Machine High speed, each bending process cost 1.0-1.5 second
      Heavy bending capacity for wire up to 10mm diameter (customized)
      This CNC wire bending machine is equipped with servo motor and air compressor as driven power to instead hydraulic pressure, thus keeping the machine clear and easy to maintain.
    2. CNC Hose Clamp Machine We have several models of CNC hose clamp making machine used for various hose clamps, including wire hose clamps and plate hose clamps.
    2. Dished End Flanging Machine As the name suggests, this dished end flanging machine is designed for producing various kinds of dished ends through two steps, such as elliptical type, fleet dish type, conical type, spherical type, and so on. It is comprised of two machines: drum pressing machine and flanging machine.
    2. Paper Taping Machine The configuration of the paper taping machine is on the basis of taping layers, quantity of wires required, and wire reel sizes. This device is able to perform single-wire taping or multi-wire taping. The taping layer ranges from 2 to 60 layers.
    2. Motor Making Machine The rotor coil winding machine is especially used for winding coils for motor rotors. This device comes with PLC control system, touch screen operation, as well as automatic wire traversing.
    2. Street Pole/Post Production Line It is the production line that is ideal for producing lamp pole / post, signal pole /post, electric pipe tower and telecom power, etc.
      Simple decoiling, leveling and slitting line
      Beveled Cutting Line
    2. APG Epoxy Resin Casting Machine Our WHAG-888 APG Epoxy Resin Casting Machine adopts the automatic pressure gelation processing technology. It is used to cast high voltage electrical components with epoxy resin. The APG technology can reduce the casting duration from dozen hours (by conventional vacuum casting method) to dozen minutes.
    2. Shot Blasting Machine Shot blasting room
      Cylinder inverting device
      Blast gun moving system
      Cylinder rotating device
    2. Serpentine Tube Bending Machine We provide two different serpentine tube bending machines: one for bending microchannel flat aluminum tubes used in automobile evaporators, and another for bending round metal tubes for heat exchangers.
    2. Coil Grab Coils grabs are usually divided into two kinds:Vertical Coil Grab and horizontal coil grab. You only need to give us your tonnage, and we will provide your desired grabs.
      Vertical coil grabs are widely used to lift, transport, shove, entruck, stack vertical steel coils, cooper coils, paper rollers, aluminum coils, wire coils and so forth.
    2. Metal Flexible Hose Forming Machine This forming machine is used to produce flexible hose in double seam lock (double-swage). Its materials include stainless steel, cooper, carbon steel and aluminum. The finished hoses are mainly used for sanitary and electric wiring, etc.
    2. Cotton Swab Making Machine This cotton swab making machine supports automatic material feeding and rolling. The cotton swab head is compact and uniform.
      Applicable stick: Plastic, paper, wood and bamboo
      Main driving motor power: 2.3kW
    2. Copper Tube Rolling Machine The copper tube rolling machine is configured according to the required diameter of finished product (copper tube). In general, our production line consists of melting furnace and caster, tube rolling mill, double-serial drawing machine (or triple-serial drawing machine), vertical type drawing machine, as well as auxiliary equipment, and so on.
    2. Transformer Core Cutting Machines We have various transformer core cutting machines available:
      Fully automatic CNC step-lap mitred core cut to length line (GEORG like)
      Compact swing shear step-lap mitred core cut to length line
      Distributed gap core cutting machine (UNICORE like)
      High speed electrical silicon steel rectangular / straight cutting machine
    2. Hydraulic Press Four-column structure, simple and economical
      Hydraulic system adopts pin-fit valve integration system, with the advantages of reliable action, long life, small hydraulic impact, no leakage.
      Electric control system is separate. You can pre-set fixed stroke or fixed pressure.
    2. Transformer Core Winding Machine

      We have various core winding machines:
      - Heavy-duty transformer core winding machine
      - Full automatic toroidal core winding machine
      - Semi-automatic toroidal core winding machine
      - Miniature magnetic core winding machine
    2. C/Z Purlin Interchangeable Forming Machine Adopting similar technology of the special structure from New Zealand, our C-Z purlin interchangeable forming machine is widely used. The rollers for C & Z are changed very quickly without dismantling any parts.
      This rolling machine can produce C & Z purlins of all specifications.
    2. Bra Ring Bending Machine The bra ring bending machine adopts one-way bearing imported from Japan for feeding roller.
      The feeding length and bra ring radius can be adjusted conveniently and freely.
      With good elasticity, the finished bra ring has round head.
    2. CNC Rebar Stirrup Bending Machine As the name suggests, our CNC rebar stirrup bending machine is extensively seen in bending rebar and stirrup for reinforced concrete. Our stirrup bender is fully automatic. Equipped with HMI, the rebar bender supports parameter preset, such as rebar and stirrups shape, size, and quantity.
    2. Wire Frame Bending Machine The wire frame bending machine utilizes pneumatic power in order to bend wires into different frames. It features four bending heads with adjustable positions for different frame sizes. Each bending head is separately controlled with adjustable bending angles. Four angles allow for a one-step formation, and operation is easily done with just a foot switch.
    2. CNC Coil Winder

      We have a variety of different CNC coil winding machines available for different applications:
      - Fully automatic air coil winding machine
      - Fully automatic speaker voice coil winding machine
      - Fully automatic wireless charging coil winding machine
      - Fully automatic miniature toroidal coil winding machine

    2. Post-tension Pipe Forming Machine Being suitable for both indoor and site work, this post-tension pipe forming machine is perfect for producing round & oval corrugated pipes, which are widely used in expressway, bridge, train and large-span post-tension concrete project.
    2. Tube Spinning Machine Two axis CNC control, small error, high speed
      Hydraulic system is equipped with water cooling system
      High speed mandrel speed 2800rpm, inverter control, speed adjustable
      Automatic loading, unloading Main Technical Data of Tube Spinning Machine
    2. Air Conditioner Radiator Core Making Machines

      We own and operate a variety of machines for processing air conditioner radiator cores:
      - Aluminum fin punching press
      - Radiator core tube expanding machine
      - Copper pipe U bending machine
      - Condenser core U L G bending machine

    2. Vacuum Resin Casting Equipment Our vacuum resin casting equipment is applicable for epoxy resin casting bushings, HV switch insulators, arc-distinguish coils, current transformers, potential transformers, dry-type transformers, as well as other electric apparatus.
      This machine is able to carry out with-stuffing and without-stuffing casting.
    2. Battery Making Machine This machine is specially designed for casting board and grids used in batteries. It can melt lead, keep constant mould temperature, feed certain lead liquid, cast and trim edge, all in one machine.
    2. Spiral Fin Tube Welding Machine The high frequency spiral fin tube welding machine adopts PLC for double frequency conversion linkage control on the product.
      The material loading, clamping, feeding, welding, and material unloading can be completed automatically.
    2. Hydraulic Ram Pump The improved water powered pump has stable performance, suitable for the application in poor environment.
      It helps realize unmanned operation throughout the year.
      Environment friendly, the hydraulic ram pump makes great contribution to environment protection and energy conservation.
    2. Polyurethane Foam Injecting Machine This injecting machine is mainly used to inject rigid or soft polyurethane foam continuously for various thermal insulation purposes.
      Being controlled by PLC, this machine offers high accuracy, simple operation and convenient maintenance. The alarming relay will give alarms when pre-setting first injection is finished.
    2. Transformer Oil Vacuum Filtering Machine This series transformer oil vacuum filtering machine is a kind of typical double-stage vacuum oil purifiers and can process and recycle transformer oils efficiently under vacuum conditions. It is capable of dehydrating, degassing, as well as purifying various insulation oil utilized for high voltage transformers, circuit breakers, etc.
    2. Steel Grating Welding Machine This steel grating welding machine is composed of gantry type welding machine, double-layer flat steel feeding device, cross bar auto falling device, steel grating hauling device, hydraulic & pneumatic system, cooling system, electric control system, etc.
    2. Pulley Spinning Machine Our pulley spinning equipment has two functions, namely center bearing hubs flow forming, and blank material folding and multi-grooves spinning. The horizontal pulley spinning machine, which can be constructed with four or five stations, supports automatic tool changing. This range of pulley spinning machine is well received because of the simple operation and high efficiency.
    2. LV Foil Coil Winding Machine We have both LV foil coil winding machines and HV foil coil winding machines available for dry transformers and high quality oil immersed transformers. The LV foil coil winding machine is available in 800mm, 1100mm and 1400mm width, single-layer or double-layer.
      Our HV foil coil winding machine is specially designed for high voltage foil coils, high automation, and high precision.
    2. 3D Panel Welding Machine This 3D panel welding machine is used to produce structural reinforced concrete panel, also called "3-D" panel. This three-dimensional panel usually adopts 50mm thick uninflammable polystyrene panel as core. One side or both sides of the panel are covered with steel wire welded mesh.
    2. Transformer Coil Winding Machine

      We have a variety of coil winding machines for distribution transformers and power transformers available:
      LV coil winding machine
      HV coil winding machine with automatic wire guiding device
      Fully automatic coil winding machine with auto insulation winding
      Fully automatic multiple coil winding machine
      Vertical coil winding machine for power transformer

    2. H-beam Production Line This line consists of CNC controlled straight/profile flame cutting machine, H-beam auto assembling machine, gantry type H-beam welding machine, H-beam steel rectifying machine and shot-blasting machine.
    2. Die Casting Machine Being made of hot-work iron or steel, nozzle, gooseneck and melting pot are especially.
       Heated by electric heater, nozzle and goose neck are safe and durable. This keeps temperature steady and avoids jamming of nozzle, resulting in no defective products.
      Auto central lubricating system, directly setting up times of toggle turning lubrication.
    2. Mechanical Press The JL21 stroke adjustable press comes with welded body for high intensity.
      The mechanical press is installed with dry type pneumatic friction clutch.
      Users can adjust the sliding block stroke through the air cylinder.
      In addition to the eight-face slide guide, this range of product is equipped with overload protection device.